Contact Us

Ningbo Lianda Plastic Pipe Co.,Ltd

Address: Ningbo Lianda Plastic Pipe Co.,Ltd, Wengfang Village, Hemudu Town

Tel: +86-0574-62952153

Fax: +86-0574-62952135

Mobile: +8615905846680

Home > Knowledge > Content

Electric melting saddle operation process

Ningbo Lianda Plastic Pipe Co.,Ltd | Updated: Feb 03, 2016

The basic requirements of electric melting pipe fittings should be protected well packaging, until the use of the party can come up with. Before starting welding, the inner surface of the pipe should be kept dry and clean. The scraping pipe welding end surface oxide layer. Use appropriate tools such as manual or mechanical scraper for this operation. The scraping should be scraped along the circumference of the outer pipe or socket pipe ends. When using saddle or saddle three pass, the welding area should be scraped. 2 ends of the plastic pipe for the mouth of the electric melting pipe with a plastic pipe cutting knife or cutting guide device for cutting the cutting pipe, must ensure that its end face perpendicular to the pipe axis. Removal of internal and external edges with a knife