Contact Us

Ningbo Lianda Plastic Pipe Co.,Ltd

Address: Ningbo Lianda Plastic Pipe Co.,Ltd, Wengfang Village, Hemudu Town

Tel: +86-0574-62952153

Fax: +86-0574-62952135

Mobile: +8615905846680

Email:customerservice@ldpipes.com

Home > Knowledge > Content

Installation and use of electric melting pipe fittings

Ningbo Lianda Plastic Pipe Co.,Ltd | Updated: Feb 03, 2016

To remove the surface oxide layer by removing the surface oxide layer from the pipe position of the socket to the electric melting pipe fittings.

According to the socket depth of the electric melting pipe fittings, the mark pen is used to make the marking line on the surface of the pipe.

The pipe is inserted into the electric melting pipe fitting until the depth of the marking line, and the axial line of the pipe after installation is coincident with the electric melting pipe fitting.

The pipe and pipe fittings are fixed to prevent dislocation and loosening during the welding process.


Previous: The role of the fusion device

Next: No Information